Room Number	Printer	IP Address
SAS 5285	Xerox B600 (B&W)	10.72.2.145
SAS 5285	Xerox B600 (B&W)	10.72.2.146
SAS 4213	Xerox B600 (B&W)	10.72.2.115
Broughton 2218	Xerox B600 (B&W)	10.72.13.198

Windows Instructions

If you have administrative access on your Windows computer, you can add a printer by following these steps

• Download PCL6 Print Driver for Administrators from Xerox
  • {Double Click} on Zip File
  • {Click} Extract all (Top under filename)
  • {Click} [Extract]
  • {Click} [X] in Top right corner
  • {Click} [X] in Top right corner
  • {Click} [X] in Top right corner
• {Click} Windows button on your start menu
• {Navigate} to Control Panel
• {Click} Hardware and Sound
• {Click} Advance Printer Setup
• {Click} [Add device].
• A dialogue box will pop up looking for printers, {Click} “The printer that I want isn’t listed. Add a new device manually”
• {Click} Add a printer using an IP address or hostname {Click} [Next]
• {Change} Device Type: TCP/IP Device
• Enter the IP address of the printer {Click} [Next].
• On the driver screen select “Have Disk…”
• Go into the driver folder Downloads/[Model]/
• Give the printer a better name and {Click} [Next]
  • ST-01SAS5285
  • ST-02SAS5285
• {Select} Do not share this printer
• {Click} [Next]
• {Click} [Print a test page]
• {Click} [Finish]

Mac Instructions

If you have administrative access on your Mac computer, you can add a printer by following these steps

• Download Print and Scan Driver Installer from Xerox
  • {Double Click}DMG File
  • {Double Click} PKG File
  • {Click} Through Install process.
  • {Click} Don’t see your printer.
  • {Click} [Continue] (at Select printer screen)
  • {Click} [Continue]
  • {Click} [Continue]
  • {Click}[Close]
• {Open} System Preferences from the Apple Menu
• {Click} Printers & Scanners
• {Click} Add Printer, Scanner, or Fax
• {Click} The Earth (middle icon)
• {Type} IP Address next to Address
• {Select} Protocol: Select (HP JetDirect.- Socket)
• {Adjust} Name:
  • ST-01SAS5285
  • ST-02SAS5285
• Use: Generic Postscript Printer
• {Click} [Add]
• {Toggle} Duplex Unit if Asked
• Click [OK]
• Try to print to printer.