• Download the appropriate driver for your platform and printer here.
• {Click} Windows button on your start menu
• {Navigate} to Control Panel
• {Click} Hardware and Sound
• {Click} Advance Printer Setup
• {Click} [Add device].
• A dialogue box will pop up looking for printers, {Click} “The printer that I want isn’t listed. Add a new device manually”
• {Click} Add a printer using an IP address or hostname {Click} [Next]
• {Change} Device Type: TCP/IP Device
• Enter the IP address of the printer {Click} [Next].
• On the driver screen select “Have Disk…”
• Go into the driver folder Downloads/[Model]/Drivers/PS/EN/Win_x64/
• Select the driver {Click} [Next]
• Do Not Share the Printer
• {Click} Devices and Printers
• {Click} [Finish]
• {Click} new printer
• {Click} Printer Properties
• {Click} Settings [Tab]
• {Click} Authentication Settings
• {Click} Popup Authentication Dialog when printing
• {Click} [OK]
• {Click} General [Tab]
• {Click} [Print Test Page]
• Leave Department Name (Blank)
• {Type} PIN/Code next to Password.
• {Click} [OK]
• Verify Test page printed.

If you have administrative access on your Windows machine, you can add a printer by following these steps

• {Click} Windows button on your start menu
• {Navigate} to Control Panel
• {Click} Hardware and Sound
• {Click} Advance Printer Setup
• {Click} [Add device].
• A dialogue box will pop up looking for printers, {Click} “The printer that I want isn’t listed. Add a new device manually”
• {Click} Add a printer using an IP address or hostname {Click} [Next]
• {Change} Device Type: TCP/IP Device
• Enter the IP address of the printer {Click} [Next].
• If asked, let Windows find the driver or use the currently installed driver and click next (Generic Postscript preferred if exact driver not found.)
• Give the printer a name and {Click} [Next]
• You can print a test page. {Click} [Finish]

• Download and Install Driver for the specific model: go.ncsu.edu/bizhubdrivers
• {Open} System Preferences from the Apple Menu
• {Click} Printers & Scanners
• {Click} Add Printer, Scanner, or Fax
• {Click} The Earth (middle icon)
• {Type} IP Address next to Address
• {Select} Protocol: Select (HP JetDirect.- Socket)
• {Adjust} Name:
• Use: {Model of BizHub Driver)
• Paper Source: PC-416
• Finisher: FS-539
• Punch Unit: PK-524 (2/3 Hole)
• Storage: On
• Allow Public User: On
• Click [Add]
• Open Terminal
  • Press <ctr><spacebar>Type Terminal [Enter]
  • {Type} cupsctl WebInterface=yes
  • Click [x] in top left corner
• Open Browser (Safari)
  • Type https://localhost:631
  • {Click} Printers (In Black bar at top)
  • {Click} “new” Printer Name
  • {Toggle} Administration to Set Default Options
  • {Click} Finishing Options
  • {Click} Account Track [On]
  • {Scroll} to bottom {Click} [Set Default Options]
  • {Type} Mac ID and Mac Password
  • {Click} Printers (In Black bar at top)
  • {Click} File–> Print
  • {Choose} new Printer Name
  • {Click} Printer Options
  • {Click} Output Method
  • {Click} Account Track
  • {Leave} Department Name {Blank}
  • {Type} Pin/Code in Password box
  • {Click} [OK]
  • {Click} [OK]
  • At top {Click} arrows next to Presets Default Settings
  • {Click} Save Current Settings as Preset
  • Preset Name: (Physics-Bizhub)
  • Available for “All Printers”
  • Custom Preset
  • Click [OK]
  • Click [Print]
• Verify printer printed.
• Try printing from Different program.

• {Open} System Preferences from the Apple Menu
• {Click} Printers & Scanners
• {Click} Add Printer, Scanner, or Fax
• {Click} The Earth (middle icon)
• {Type} IP Address next to Address
• {Select} Protocol: Select (HP JetDirect.- Socket)
• {Adjust} Name:
• Use: Generic Postscript Printer
• {Click} [Add]
• {Toggle} Duplex Unit if Asked
• Click [OK]
• Try to print to printer.

In order to add a printer in Linux you will need sudo access. If you do not have sudo access, please email us so that we can assist. If you do have sudo access, follow these steps:

•  You will need to download the proper PPD (Postscript Printer Description) file for the printer you’re installing: (Linux-PS-PPD file) and save it to your Computer (for example, your Downloads folder).
• Open terminal and run the following command, but replace PRINTERNAME with a name for the printer you are adding and IPADDRESS with the IP Address of the printer you are adding (please make note of the IP address, as the menu automatically collapses). . sudo /usr/sbin/lpadmin -p PRINTERNAME -E -v socket://IPADDRESS:9100 -P ~/Downloads/<name_of_PPD_file>.ppd
• To set this as your default printer, run the following command, replacing PRINTERNAME with the name you gave to the printer you just addedsudo /usr/sbin/lpadmin -d PRINTERNAME